Dry Treat HANAFINN Oxy-Klenza

Dry Treat in New Zealand Mob: 021 930 066 E-mail: drytreat@lustre.co.nz

Dry Treat Oxy-Klenza is a powerful oxygen-based, chlorine free cleaner for inside / outside, and residential / commercial applications. It is a multi-purpose cleaner that breaks down organic stains and soiling. Oxy-Klenza™ is ideal for cleaning patios, kitchens, bathrooms, decks, floors, building facades, walls, cladding, public spaces, swimming pool surrounds, garages, driveways, eating and entertaining areas.

Pack size:     1 kg and 10 Kg

Pack size:   1 kg and 10 Kg

Typical application: Oxy-Klenza™ is a powerful alkaline cleaner (typically pH 9-11) for tough, dried-in stains and soiling, including grease, mold, algae and leaf marks. It is safe for use on natural stone, tile, masonry, concrete, grout, vinyl and unfinished wood.

Benefits: Oxy-Klenza™ is a powder concentrate that goes further and is safer to transport / store. It also disinfects and breaks down odors. Oxy-Klenza™ is biodegradable – decomposing into oxygen, water and natural salts.

 

Find a local Dry-Treat Dealer / Accredited Applicator near you.

Become a Dry Treat Dealer or an accredited Dry Treat applicator email us or contact us.

Application rate: Typical usage rate of 2 scoops (180 g) of Oxy-Klenza™ into a gallon (4 Litres) of warm water in an open bucket. This is typically enough to clean 80 sq.ft. (8sq.m.), depending on surface conditions.

How to use:

Dry Treat Oxy Klenza Utilizing a Mop Bucket

ption 2 Low Pressure Sprayer or Watering Can

Option 3 : Mop Bucket with a bristle Brush

Dry Treat Oxy Klenza Grout Cleaner

Dry Treat Oxy Klenza Removes Oil Stains

Method One:

  1. TEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION.
  2. If satisfied with test results; for heavy cleaning prepare product by stirring 2 scoops (180 g) of Oxy-Klenza™ into a plastic bucket filled a gallon (4 Litres) of clean warm water until it dissolves.
  3. Apply solution generously with a mop or plastic watering can and leave for 3 minutes. Do not allow solution to dry on surface (large areas can be cleaned in sections). Use a mop or sponge to clean the surface. Heavily soiled areas should be gently scrubbed with a soft brush.
  4. Repeat application if required.
  5. Rinse surface thoroughly with clean water.

Method Two:

  1. TEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION.
  2. If satisfied with test results, prepare surface for full application by sweeping or vacuuming all loose dust and dirt from the surface.
  3. Thoroughly wet the surface with water. Large areas should be cleaned in sections.
  4. Lightly sprinkle Oxy-Klenza™ onto the wet surface and leave for 3 minutes. Do not allow solution to dry on surface. Use a mop or sponge to clean the surface. Heavily soiled areas should be gently scrubbed with a soft brush. Excess powder will dissolve by scrubbing.
  5. Typical usage rate is 4 scoops (360 g) Oxy-Klenza™ per 80 sq.ft. (8 sq.m.), depending on surface conditions.
  6. Repeat application if required.
  7. Rinse surface thoroughly with clean water.

Advanced tips:

  1. Oxy-Klenza™ can be mixed into a paste with a little water and used to create a poultice, which removes deep stains from countertops. Refer to the Poultice Cleaning Method guide for details.
  2. Oxy-Klenza™ can be used to disinfect artificial turf.
  3. Oxy-Klenza™ qualifies for LEED 2009 IEQ Credit 3.3: Green Cleaning - Purchase of Sub-stainable Cleaning Products and Materials 1 Point.

Find a local Dry-Treat Dealer / Accredited Applicator near you.

Become a Dry Treat Dealer or an accredited Dry Treat applicator email us or contact us.